HB-M1500/2 is 2-cavity, max. volume 1.5L; This model can produce PET bottles for carbonated, water, pesticide, cosmetic etc.

The main difference of preform manual input machine and automatic machine is the conveyor, the automatic machine with conveyor and preform manual input machine without conveyor.

A.Adopt PLC control

B.Adopt infrared lamps for heating, with high penetrating ability; preform self rotation and channel revolute, equal and fast heating;

C.Lamps, reflector board width and height can be adjusted, for differnet preforms heating. with auto heat exhaust device to keep constant temperature in channel.

D.Every mechanical action is with self lock safety device, when there is fault on one process, the program will switch to safe condition automatically.

E.All actions drived by cylinder, not adopt oil pump. No pollutation, low noise.

F.Air/gas circuits designed for three sections, to meet different pressure requirement of blowing and action.  

G.Adopt high pressure and double Z-arm ram for mold clamping, with high clamping force.

H.Operation by manual and auto available.

I. Safe and unique valve position design, air/gas circuit is clearly.

J.Low cost, high efficiency, easy operation, simple maintenance.

K.Excellent cooling system

L.Simple installation and operation.

M.Bottle rejection rate lower than 0.2%

TYPE	ITEM	HB-M1500/2
CONTAINER	Number of cavity	2
	Theoretical output	1600-2000 pcs/hr
	Max.container volume	1.5L
	Max.neck diameter	80mm
	Max.container diameter	105mm
	Max.container height	330mm
ELECTRICAL SYSTEM	Number of lamp	14 pcs(1500w/pcs)
	Max.heating power	21kw
	Installation power	21.5kw
	Actual power consumption	12-16kw
AIR SYSTEM	Operatating pressure	0.7Mpa
	Low pressure consuming	1500 Ltr/min
	Blowing pressure	<3.5Mpa
	High pressure consuming	2000-3000Ltr/min
CHILLER WATER	Operating pressure	0.5-0.6Mpa
	Temperatuer	10-12
	Consuming	3600kcal/hr
	Flow rater	20Ltr/min
MACHINE	Machine dimension	2.5×1.6×1.8(m)
	Machine weight	1.6T